KYN28-12 Factory Customized Sizes Long Service Life Aluminum-Zinc Plate Metal Armoured Medium Open Type Switchgear

Product description

KYN28-12 armored removable AC metal-enclosed switchgear is suitable for three-phase AC rated voltage 12kV, rated frequency 50Hz power system, used to receive and distribute electrical energy and control, protect and monitor the circuit.
This product complies with GB3906 "3~35kV AC metal-enclosed switchgear", GB/T11022 "High-voltage switchgear and control equipment standard common technical requirements", IEC60298 ``rated voltage 1KV above 52KV and below AC metal enclosure switch equipment and control equipment" , DL/T404 "Indoor AC High Voltage Switchgear Ordering Technical Conditions" standard requirements.

Model and its meaning

① High voltage armored switch cabinet
② Removable

③ Indoor type
④ Design serial number

⑤ Rated voltage
⑥ Vacuum circuit breaker

⑦ Spring operating mechanism
⑧ Rated current

⑨ Rated short-circuit breaking current
⑩ One time plan number

Conditions of Use

• The upper limit of ambient air temperature +40°C, the lower limit of -15°C
• Maximum altitude of equipment installation site: 1000m
• Environmental humidity Daily average relative humidity W 95% Monthly average relative humidity W 90%
• The earthquake intensity does not exceed 8 degrees
• The surrounding air should not be significantly polluted by corrosive or combustible gas, water vapor, etc.
• No serious pollution and frequent severe vibration.

Technical Parameters

Installation dimension drawing

A. Busbar room
B. Circuit breaker handcart room
C. Cable room
D, relay instrument room leak pressure device
1, 1 Waidi
1, 2 Secondary wiring trough
2. Branch bus
3. Busbar casing
4. Main bus
5. Static contact device
6. Static contact box
7. Current transformer
8. Grounding switch
9. Cable
10. Lightning arrester
11. Ground bus

12. Loading and unloading partitions
13. Partition (trap)
14. Secondary plug
15. Circuit breaker handcart operating mechanism
16. Circuit breaker handcart
17. Withdrawable horizontal partition
18. Grounding switch operating mechanism
19. Bottom plate

Need to know when ordering

Users need to provide the following information if ordering
• Main circuit plan number, purpose and main line system diagram, distribution room layout diagram and arrangement diagram, etc.

• Requirements for control, measurement and protection functions of switchgear, as well as requirements for other locking and automatic devices.
• The model, specification and quantity of the main electrical components in the switchgear.
• If the busbar bridge connection is required between switchgear or the incoming cabinet, the rated current carrying capacity of the busbar bridge, the span of the busbar bridge, the height from the ground and other specific requirements data should be provided.
• When the switchgear is used under special environmental conditions, it should be specified when ordering.
• Other special requirements.

        Wenzhou Qiupu Electric Power Co., Ltd. is located in Yueqing Economic Development Zone, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production and sales of electric power products such as circuit breakers, transformers, power distribution switches and high and low voltage electrics. Our products are widely used in financial, communications, municipal, transportation, power, construction, aerospace, industrial control and other important areas, has won the majority of users praise and signed a long-term cooperation agreement.
        As an innovative technology-based enterprises, the company has strong technical force and the world's leading production technology and high-end testing equipment, and establish and improve the procurement of components, product processing assembly, testing, packaging to sell a complete set Quality management system to ensure that every product of the eligibility, the company has 10 years of experience in the power industry, and is still growing, product and sales network throughout the country.